Thrust, Impact and Friction Testing

Testing Systems

Test system System data Application
Pendulum ram impact testing machine FRANK 53573 ZWICK 5102 Work resulting from impact: (0.5; 1; 2; 4) J Impact bending test with Dynstat and Charpy test pieces (impact and notch impact strength)
Rebound resilience apparatus Bareis digi-Test Pendulum work capacity: 0.5 J
Peen (hemisphere ): 15 mm
Impact velocity: 1.98 ms-1
Release angle: 90°
Pendulum length: 200.4 mm
Determination of rubber and elastomer's rebound resilience
Electromechanical abrasion tester ZWICK 6102 Load: (5 and 10) N Gear ring for turning the test piece round its axle Determination of resistance to abrasion in mm³
Electromechanical abrasion tester TABER ABRASER MODELL 503, TYP 352 Load: (250, 500, 1000) g
Friction wheel: CS10, CS17, H10, H18, H22
Rotations: (100, 500, 1000) min-1
Additional equipment: Diamant wheel dresser
Determination of resistance to abrasion in mg/rotation
Cold brittleness device Height of fall / slope: 20.4 cm / 80°
Speed: (2.0 ± 0.15) ms-1
Determination of cold brittleness temperature during impact stress with strip samples